The Complete Buying Guide For Hydraulic Hose Fittings
Whether working with a high-tech manufacturing operation or a plumbing and manufacturing plant, hydraulic hose fittings are vital to the safety, maintenance and use of all sorts of equipment. When choosing hydraulic hose fittings, there are many things you need to think about. Size, design and material are just some of the factors that will affect your choice. In this guide, we have jotted down some of the most important things that should be considered while choosing hydraulic fitting:
How Do You Choose The Right Hydraulic Hose Fitting?
Identify The Type Of Hydraulic Hose End Fitting You Need:
There are basically three types of hydraulic hose end fittings: T-fittings, Y-fittings and unions.
- T-fitting: This is a simple fitting that can be used with any type of hydraulic fluid and will allow you to connect two hoses together. The T-fitting is made up of two pieces that screw together, creating the T shape when connected together.
- Y-fitting: A Y-fitting is similar to a T-fitting but it has three ports instead of two ports. It is also made up of two pieces that screw together to create one piece when connected together.
- Union: A union is another type of fitting that allows you to connect multiple hoses at once using only one port on each side rather than multiple ports on both sides like the previous two fittings discussed above.
Identify The Working Pressure Requirement Of Your Application:
Pressure ratings are expressed in two ways: Working pressure is the pressure at which a fitting is rated. The bursting pressure is the maximum pressure at which a fitting can be safely operated without bursting. You should always choose fittings with working pressures that are greater than or equal to your application’s operating pressure requirements.
Select A Material That Is Compatible With Your Application:
There are different types of materials that are used in hydraulic hose fittings. Each type has its own advantages and disadvantages depending on your application. For example, if you want to connect two different types of fluid together, then you will need an aluminum fitting because it will not corrode when exposed to both fluids at once.
However, if you’re working with high-pressure applications, such as forklifts or excavators, then choose a steel or stainless steel fitting. These have greater tensile strength than plastic fittings and are less likely to fail under pressure.
Also, if you will only be using low-pressure hydraulic hoses, then plastic fittings will work just fine. Be sure to check the pressure ratings on all fittings before making your final decision though.
Identify Your Thread Pitch & Type:
The thread pitch is how far apart the threads are on the inside of the fitting. The most common types of threads are 40, 60, 80 and 100.
The type of thread refers to whether it is National Pipe Taper (NPT) or British Standard Pipe Taper (BSP). These refer to the shape of the threads on the outside of the fitting. Choose according to your application.
Determine Reusable Or Permanent Fittings:
Reusable hydraulic hose fittings allow you to detach and reconnect your hoses with ease. This makes them ideal for high-pressure applications that require frequent maintenance and repairs. They can also be used in applications where multiple hoses are used at once, such as in agricultural machinery or construction equipment.
Permanent hydraulic hose fittings are designed so that they cannot be removed without damaging the fitting or the hose itself. They are ideal for situations where there is no need for frequent maintenance or repairs, such as when using one piece of equipment repeatedly without any need for replacement parts or repairs.
In short, reusable fittings have the advantage of being able to be removed and replaced as needed. However, permanent fittings will not allow for any adjustments once they are installed. While choosing a hydraulic hose fitting, Pick An End Style That Will Work For Your Application.
Wrap up:
Follow these tips to make sure you get the right hydraulic hose fittings for your application!